Klein Tools ET450 Advanced Circuit Tracer Kit

The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.

Features
The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires
Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground
Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle
Audible beep and visual indicators on receiver denotes signal strength
Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized
Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V
Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case
Flashlight and NCV Function on Receiver; Accessories, and Hard Case

Warnings
Read, understand, and follow all warnings and instructions before operating testers.
Before each use, verify tester operation by testing on a known live and correctly wired receptacle and circuit.
DO NOT use if the tester appears damaged in any way.
Always consult a qualified electrician to resolve wiring problems. ALWAYS adhere to local and national safety codes.
NEVER use the tester on a circuit with voltages that exceed the category-based rating of this tester.
Inspect the meter and test leads before use. DO NOT use if they appear damaged.
DO NOT use testers during electrical storms or in wet weather.
Turn off testers and disconnect test leads before attempting to replace batteries or fuses.
Use personal protective equipment to prevent shock and arc blast injury where hazardous live connectors are exposed.

• Included: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying Case
• Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires
• Overall Height: Receiver - 1.84" (4.5 cm); Transmitter - 1.51" (3.9 cm)
• Overall Width: Receiver - 3.90" (9.9 cm); Transmitter - 2.07" (5.3 cm)
• Standard: CAT III 600V
• Material: ABS and Electronic Components
• Lead Length: 3' (1 m) and 20' (6.1 m)
• Type: Circuit Tracer
• Drop Protection: 6' (2 m)
• Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V
• Overall Length: Receiver - 7.05" (17.9 cm); Transmitter - 8.72" (22.2 cm)
• Ingress Protection: IP42
• Display: Receiver - LCD with Backlight
• Tests Continuity: No
• Frequency: Transmitter - AC 45Hz to 65Hz; Receiver - 33kHz
• Interchangeable Leads: Yes
• Batteries: Transmitter - 6 × 1.5V AA Alkaline; Receiver - 4 × 1.5V AA Alkaline
• Integral Lead Storage: No
• Pollution Degree: 2
• Control Type: Transmitter and Receiver
• Case Included: Yes
• Battery Life: Up to 24 hr
• Height: 4.0000 in
• Width: 12.7500 in
• Depth: 16.1200 in
• Weight: 6.2800 lbs