About this product
The 40V max XGT® Brushless Cordless 1/2” Hammer Driver-Drill (GPH01D) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry. The GPH01D is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makita’s 18V LXT Cordless 1/2” Hammer Driver-Drill (XPH07), with two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop. The GPH01D is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT™) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Features
OUTPOWER: Makita-built brushless motor delivers 1,250 in.lbs. of Max Torque; out powers similar models in heavy-load applications
OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
OUTLAST: XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM)*
Compact length at only 7-1/8"; ideal for working in tight spaces
Ultra-smooth variable speed trigger provides optimum control
Reinforced gear housing engineered for maximum job site durability
All-metal chuck for increased job site durability
Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
40V max XGT® Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
Makita-built brushless motor delivers 1,250 in.lbs. of Max Torque; out powers similar models in heavy-load applications
Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
XGT® Rapid Charger’s built-in chip communicates during the charging process to control current, voltage, and temperature for more efficient charging
Includes
40V max XGT® Brushless 1/2" Hammer Driver-Drill (GPH01Z)
40V max XGT® Rapid Optimum Charger (DC40RA)
2 40V max XGT® 2.5Ah Battery (BL4025)
Side Handle
Tool Bag
Specifications
- System: 40V max XGT®
- Chuck Size: 1/2"
- Maximum Torque (in.lbs.): 1,250 in.lbs.
- No Load Speed (var. 2 spd): 0 - 650 / 0 - 2,600 RPM
- Blows Per Minute (2 speed): 0 - 9,750 / 0 - 39,000 BPM
- Capacity (steel): 13/16"
- Capacity (masonry): 13/16"
- Overall Length: 7-1/8"
- Capacity (wood): 3"
- Net Weight (with battery): 6 lbs.
- Shipping Weight: 13.74 lbs.
- 3-year limited warranty on tool, battery and charger
- Country of Origin: China
