About this product
Resin-Based, Water-Based Concrete Curing Compound
The 1100-CLEAR series of water-based concrete curing compounds is formulated from hydrocarbon resins and may be used on interior, exterior, vertical, and horizontal concrete surfaces. Once applied, 1100-CLEAR forms a premium-grade membrane that retains an optimum amount of water in freshly placed concrete for complete hydration of the cement. NOTE: After approximately four weeks, the membrane begins to chemically break down. The membrane will eventually dissipate from the surface. This process usually takes another 3 - 5 weeks under normal traffic, exposure to UV, and weathering conditions.
USES
The 1100-CLEAR series has been used on both interior and exterior applications where paint, resilient tile or resilient flooring may be applied later. Because of the wide variety of coatings, paints, adhesives, and toppings available, contact the manufacturer of the flooring system or subsequent coating or topping for application approval over resin-based curing compounds. A small test application is always recommended.
FEATURES/BENEFITS
When properly applied, 1100-CLEAR produces a premium-grade film, which optimizes water retention.
Furnished as a ready-to-use, true water-based compound.
Produces hard, dense concrete ... minimizes hair checking, thermal cracking, dusting, and other defects.
Offers a compressive strength significantly greater than improperly or uncured concrete.
Increases tensile strength for greater resistance to cracking and surface crazing.
Improves resistance to abrasion and the corrosive actions of salts and chemicals.
Minimizes excessive shrinkage.
Can be applied quickly and easily with conventional commercial spray equipment.
Formulations are also available with red fugitive dye added.
VOC compliant ... VOC content is
Specifications
- U.S. EPA Architectural Coatings Rule: 350 g/L maximum VOC for concrete curing compounds
- SCAQMD Rule 1113: 100 g/L maximum VOC for concrete curing compounds and waterproofing concrete/masonry sealers
- Ozone Transport Commission (OTC): 350 g/L maximum VOC for Concrete Curing Compounds
- ASTM C 309, Type 1, Classes A & B (Type 1-D also available)
- AASHTO M 148, Type 1, Classes A & B (Type 1-D also available)
- DRYING TIME: Typically dries in 1-2 hours, depending on jobsite conditions (temperature, wind, etc.) Restrict foot traffic for at least four hours; 12 hours is preferable.
- FLASH POINT: >210� F (99� C).
