About this product
WATER-BASED ACRYLIC CURING AND SEALING COMPOUND
VOCOMP-20 water-based acrylic curing and sealing compound is formulated using special acrylic polymers in a true water-based carrier. Once properly applied, VOCOMP-20 provides a nearly impermeable seal for efficient moisture retention. VOCOMP-20 appears �milky white� in the container and, when first applied, leaves a �bluish� cast on the concrete for easy visual confirmation of coverage. VOCOMP-20 dries clear to provide a transparent sheen finish. The sheen can be controlled by the number of coats applied. VOCOMP-20 resists yellowing from ultraviolet exposure and provides a durable, long-lasting finish that offers improved resistance to chemicals, petroleum and abrasives.
VOCOMP-20 will minimize hair-checking, premature cracking, dusting and spalling. However, good concrete and good concreting practices should be used, as VOCOMP-20 is not a cure-all for improperly mixed or placed concrete. VOCOMP-20 meets the very strict maximum VOC content limits of 100 g/L for sealers as required by certain California Air Pollution Control Districts, as well as the 400 g/L VOC maximum required by the U.S. EPA Architectural Coatings Rule.
USES
VOCOMP-20 water-based acrylic curing and sealing compound may be quickly and easily applied to simultaneously cure and/or seal new interior or exterior as well as vertical or horizontal concrete surfaces. It is ideal for application on commercial and industrial floors, sidewalks, basement and garage floors, multi-level parking decks, patios, driveways and parking areas. VOCOMP-20 dries very quickly to protect and enhance the natural appearance of concrete.
FEATURES/BENEFITS
Ready-to-use, non-yellowing, water-based compound that cures and/or seals concrete in one quick and easy application.
Minimizes hair-checking, premature cracking, dusting and spalling.
Dries quickly on new concrete to a durable, clear sheen finish that protects and enhances the natural appearance of concrete.
Ideal for application on interior, exterior, horizontal and vertical concrete surfaces.
Resists adhesion of mortar droppings to protect concrete floors during construction ... allows easier cleanup.
Tough, durable finish offers improved resistance to chemicals, petroleum and abrasives.
Application tools may be cleaned with soap and water.
VOC compliant � VOC content is
Specifications
- ASTM C 309, Type 1, Class B
- AASHTO M 148, Type 1, Class B
- Meets 100 g/L maximum VOC content allowed by SCAQMD Rule 1113.
- Dried film is USDA accepted.
- Meets Class A requirements of the ultraviolet light degradation/yellowing classification of ASTM C 1315, Section 6.4.1
- COVERAGE is approximately 300 ft.�/gal. (7.36 m�/ L). For optimum performance, an additional application is recommended. Coverage may vary due to porosity and condition of the concrete.
