Description
The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.
The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multi-meters, recorders or data loggers.
AC RMS
Output sensitivity (AC-coupled): 1 mV, 10 mV, 100 mV, 1 mV per A
Load Impedance: 100 kΩ minimum
Accuracy: at +25°C ±1% of range (45 Hz to 65 Hz)
Linearity: 10% to 100% of range ±0.2% of reading
Noise: 8 mV AC RMS (30 A) 2 mV AC RMS (300 A, 3000 A)
Phase Error: < ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz)
Position Sensitivity: With cable > 25 mm from the coupling ±2% of range
External Field: With cable > 200 mm from the head ±1% of range
Power Supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient: ±0.08% of reading per °C
Working Voltage: See Safety standards section
Head Circumference: 610 mm (24 in)
Head Cable Diameter: 14.3 mm (0.56 in)
Head Bend Radius: 38.1 mm (1.5 in)
Cable Length (head to electronics): 2 m (6.56 ft)
Output Connection: Molded 4 mm safety plugs (not integrated)
Operating Temperature Range: 0°C to +70°C (32°F to 158°F) (head and electronics)
Storage Temperature Range: -40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics)
Weight: 180 g (6.34 oz) (head)
190 g (6.70 oz) (electronics)
Safety Standards: EN 61010-031: 2002, EN 61010-2-032: 2002, EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2. Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards: EN 61326: 1998 +A1, A2, and A3
The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multi-meters, recorders or data loggers.
Specifications
Current ranges: 20 A, 200 A, 2000 AAC RMS
Output sensitivity (AC-coupled): 1 mV, 10 mV, 100 mV, 1 mV per A
Load Impedance: 100 kΩ minimum
Accuracy: at +25°C ±1% of range (45 Hz to 65 Hz)
Linearity: 10% to 100% of range ±0.2% of reading
Noise: 8 mV AC RMS (30 A) 2 mV AC RMS (300 A, 3000 A)
Phase Error: < ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz)
Position Sensitivity: With cable > 25 mm from the coupling ±2% of range
External Field: With cable > 200 mm from the head ±1% of range
Power Supply: 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient: ±0.08% of reading per °C
Working Voltage: See Safety standards section
Head Circumference: 610 mm (24 in)
Head Cable Diameter: 14.3 mm (0.56 in)
Head Bend Radius: 38.1 mm (1.5 in)
Cable Length (head to electronics): 2 m (6.56 ft)
Output Connection: Molded 4 mm safety plugs (not integrated)
Operating Temperature Range: 0°C to +70°C (32°F to 158°F) (head and electronics)
Storage Temperature Range: -40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics)
Weight: 180 g (6.34 oz) (head)
190 g (6.70 oz) (electronics)
Safety Standards: EN 61010-031: 2002, EN 61010-2-032: 2002, EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2. Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards: EN 61326: 1998 +A1, A2, and A3
