Description
The covetto form produced by the cove bit is one of the classic building blocks for many molding profiles. Used alone or in combination with beads and fillets. Use this cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-round.
For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed.
Radius: 1/4"
Cutting Height: 9/16"
Shank: 1/2"
Overall Length: 2-3/8"
Replacement Bearing: 47704
Flutes: 2
For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed.
Specifications
Diameter: 7/8"Radius: 1/4"
Cutting Height: 9/16"
Shank: 1/2"
Overall Length: 2-3/8"
Replacement Bearing: 47704
Flutes: 2
