Carbide Tipped Straight Plunge 1/2" x 2" (1/2" Shank)

Use this two-flute bit where fine finish is needed. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per turn yield a smooth surface, with a feed rate slightly reduced.

Specifications

Cuts: Wood, MDF, Plywood

Direction: Down-Cut

Diameter: 1/2"

Cut Depth: 1/4"

Angle: 0 Degrees

Radius: .015 (.4mm)

Cutting Height: 2"

Shank: 1/2"

Overall Length: 4-1/4"