Adjustable Web Restraint Lanyard (4 to 6 feet)

The 6-Foot Adjustable Web Restraint Lanyard Z07 features single-leg construction and utilizes 1-inch polyester webbing for resistance to UV light and abrasion. The webbing also has a tensile strength of 9,800 pounds, and features embedded wear-indicating threads. This lanyard also features double-locking snap hooks at the attachment and anchorage ends. The StayPut buckle allows the length to be adjusted from 4-1/2-to-6-feet to eliminate unnecessary free-fall. The end terminations feature wear pads for additional safety and long life, while both ends feature a steel thimble for extra resistance to wear. Restraint Lanyards are intended to be used on platforms, in buckets and other areas to prevent the possibility of a fall. Different lengths and types are available to restrict leading edge access. Restraint lanyards can be attached to the back D-Ring on a full body harness or restraint belt. The Shock Absorbing Lanyard is the active component of a Personal Fall Arrest System. In the event of a fall, a Shock Absorbing Lanyard will not only arrest the fall, preventing you from hitting the next lower level, they will reduce the forces of impact on your body. All of our lanyards are designed to meet or exceed applicable OSHA and ANSI standards.

Specifications

Webbing: Webbing; polyester; Min. 8,500 lbs tensile

strength

Connector: Alloy Steel; Min.5,000 lbs tensile strength

Connector Gates: Alloy Steel; Min. 3,600 lbs. from load and

side load

Adjuster: Alloy Steel; Min. 3,375 lbs tensile strength

Tensile Strength: Min. 5,000 lbs.

Max. Capacity: 425 lbs.

To maintain ANSI Z359 compliance, limit

total user weight to 310lbs

OSHA: CFR1926.502, CFR1910.66

ANSI: A10.32‐2004, Z359.3‐2007