Internal Y-Leg Shock Absorbing Lanyard with Rebar Hooks Loop (6 Feet)

The Internal 6-Foot Y-Leg Shock Absorbing Lanyard Rebar Hooks Loop features Y-leg construction and utilizes 1-/4-inch tubular polyester webbing for resistance to UV light and abrasion and a tensile strength of 6,000 pounds. This lanyard also features anchorage end rebar hooks. The internal continuous-length shock absorber limits arresting forces to 900 pounds or less. Internal shock-absorbing lanyards feature a unique continuous-length shock absorbing material inside a durable tubular web. These products are not only economical, but also provide a smooth and efficient arrest in the event of a fall. The slim profile is light weight, which reduces end-user fatigue and increases productivity and compliance. Internal Shock Absorbing Lanyards are constructed using a variety of tubular webs. Inside the tubular webbing is a continuous-length polyester web shock absorber. In the event of a fall, the compressed lanyard expands while dissipating the forces and arresting the fall. The tubular web also acts as a fail-safe, as it will not allow the lanyard to expand beyond the OSHA and ANSI limits for deceleration distance. Internal lanyards are an effective, lightweight alternative to traditional pack lanyards. All of our lanyards are designed to meet or exceed applicable OSHA and ANSI standards.

Specifications

Length: 6 feet

Web: Polyester ‐ min. strength of 9,800 lbs.

Connector: Alloy Steel; Min.5,000 lbs tensile strength

Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and

side load

Tensile Strength: Min. 5,000 lbs.

Max. Capacity: 425 lbs.

To maintain ANSI Z359 compliance, limit

total user weight to 310lbs

OSHA: CFR1926.502, CFR1910.66

ANSI: Z359.1, A10.32‐2004