Description
Drive pins with a .300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel. The pins are formed with a 0.145" diameter shank, and a specially designed point to allow proper penetration into typical base materials.
These Pins from Powers Fasteners come with a 14 gauge metal washer to increase resistance to pullover by increasing the bearing surface. The insulation washer has a thickness of 0.035".
A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.
Shank Length: 3 Inch
Head Diameter: 0.3 Inch
Shank Diameter: 0.143 Inch
Washer Thickness: 14 Gauge
Washer Outside Diameter: 7/8 Inch
These Pins from Powers Fasteners come with a 14 gauge metal washer to increase resistance to pullover by increasing the bearing surface. The insulation washer has a thickness of 0.035".
A plastic flute is mounted over the point to retain the drive pin in the fastener guide of the tool providing guidance during the driving operation.
Specifications
100 Pieces Per BoxShank Length: 3 Inch
Head Diameter: 0.3 Inch
Shank Diameter: 0.143 Inch
Washer Thickness: 14 Gauge
Washer Outside Diameter: 7/8 Inch
