Description
The Klein Tools ET450 Advanced Circuit Tracer Kit is a professional tracer for energized and non-energized breakers, fuses, and wires. When the Transmitter is connected to a circuit, the Receiver’s sensitivity can easily be adjusted to detect the transmitted signal on breakers, fuses, and wire through drywall, cement block, and underground. Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case with handle for convenient transportation and storage.
Features
The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires
Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground
Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle
Audible beep and visual indicators on receiver denotes signal strength
Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized
Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V
Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case
Flashlight and NCV Function on Receiver; Accessories, and Hard Case
Warnings
Read, understand, and follow all warnings and instructions before operating testers.
Before each use, verify tester operation by testing on a known live and correctly wired receptacle and circuit.
DO NOT use if the tester appears damaged in any way.
Always consult a qualified electrician to resolve wiring problems. ALWAYS adhere to local and national safety codes.
NEVER use the tester on a circuit with voltages that exceed the category-based rating of this tester.
Inspect the meter and test leads before use. DO NOT use if they appear damaged.
DO NOT use testers during electrical storms or in wet weather.
Turn off testers and disconnect test leads before attempting to replace batteries or fuses.
Use personal protective equipment to prevent shock and arc blast injury where hazardous live connectors are exposed.
Application: Trace Energized and Non-Energized Breakers, Fuses, and Wires
Overall Height: Receiver - 1.84" (4.5 cm); Transmitter - 1.51" (3.9 cm)
Overall Width: Receiver - 3.90" (9.9 cm); Transmitter - 2.07" (5.3 cm)
Standard: CAT III 600V
Material: ABS and Electronic Components
Lead Length: 3' (1 m) and 20' (6.1 m)
Type: Circuit Tracer
Drop Protection: 6' (2 m)
Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V
Overall Length: Receiver - 7.05" (17.9 cm); Transmitter - 8.72" (22.2 cm)
Ingress Protection: IP42
Display: Receiver - LCD with Backlight
Tests Continuity: No
Frequency: Transmitter - AC 45Hz to 65Hz; Receiver - 33kHz
Interchangeable Leads: Yes
Batteries: Transmitter - 6 × 1.5V AA Alkaline; Receiver - 4 × 1.5V AA Alkaline
Integral Lead Storage: No
Pollution Degree: 2
Control Type: Transmitter and Receiver
Case Included: Yes
Battery Life: Up to 24 hr
Height: 4.0000 in
Width: 12.7500 in
Depth: 16.1200 in
Weight: 6.2800 lbs
Features
The Advanced Circuit Tracer Kit provides reliable tracing of energized or non-energized breakers, fuses, and wires
Easily adjust receiver sensitivity level to detect the transmitted signal through drywall, cement block, and underground
Versatile applications include tracing wires, conduit or pipes, or a single wire in a bundle
Audible beep and visual indicators on receiver denotes signal strength
Receiver features a flashlight for illumination in low-light areas and NCV function to test if wires are energized
Transmitter has AC/DC external voltage indicators of 12V, 48V, 120V, 240V, and 480V
Kit comes with transmitter, receiver, blade and ground prongs, alligator clips, 3-Foot and 20-Foot lead adapters, AC plug leads, instructions, all required batteries, and a hard carrying case
Flashlight and NCV Function on Receiver; Accessories, and Hard Case
Warnings
Read, understand, and follow all warnings and instructions before operating testers.
Before each use, verify tester operation by testing on a known live and correctly wired receptacle and circuit.
DO NOT use if the tester appears damaged in any way.
Always consult a qualified electrician to resolve wiring problems. ALWAYS adhere to local and national safety codes.
NEVER use the tester on a circuit with voltages that exceed the category-based rating of this tester.
Inspect the meter and test leads before use. DO NOT use if they appear damaged.
DO NOT use testers during electrical storms or in wet weather.
Turn off testers and disconnect test leads before attempting to replace batteries or fuses.
Use personal protective equipment to prevent shock and arc blast injury where hazardous live connectors are exposed.
Specifications
Included: Transmitter, Receiver, Blade and Ground Prongs, Alligator Clips, 3' and 20' Lead Adapters, AC Plug Leads, Instructions, All Required Batteries, and Hard Carrying CaseApplication: Trace Energized and Non-Energized Breakers, Fuses, and Wires
Overall Height: Receiver - 1.84" (4.5 cm); Transmitter - 1.51" (3.9 cm)
Overall Width: Receiver - 3.90" (9.9 cm); Transmitter - 2.07" (5.3 cm)
Standard: CAT III 600V
Material: ABS and Electronic Components
Lead Length: 3' (1 m) and 20' (6.1 m)
Type: Circuit Tracer
Drop Protection: 6' (2 m)
Voltage: External Indicators for 12V, 48V, 120V, 240V, and 480V
Overall Length: Receiver - 7.05" (17.9 cm); Transmitter - 8.72" (22.2 cm)
Ingress Protection: IP42
Display: Receiver - LCD with Backlight
Tests Continuity: No
Frequency: Transmitter - AC 45Hz to 65Hz; Receiver - 33kHz
Interchangeable Leads: Yes
Batteries: Transmitter - 6 × 1.5V AA Alkaline; Receiver - 4 × 1.5V AA Alkaline
Integral Lead Storage: No
Pollution Degree: 2
Control Type: Transmitter and Receiver
Case Included: Yes
Battery Life: Up to 24 hr
Height: 4.0000 in
Width: 12.7500 in
Depth: 16.1200 in
Weight: 6.2800 lbs
