Description
Fluke VoltAlert AC non-contact voltage testers are easy to use just touch the tip to a terminal strip, outlet, or supply cord. When the tip turns red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can easily test for energized circuits in the workplace or at home.
This unit operates by sensing the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow and beeping at the tip (if not switched OFF) indicate the presence of voltage.
Detector Tip Style: Flat-tip
Light Source: One high intensity red LED
Agency Approvals: CEc CSA usC-Tick
Safety IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V
EMC IEC 61326-1: Portable
IP Rating: IP 40
Operating Temperature: -10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges: 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40 to 55°C)
Operating Altitude: 3000 m
Cleaning: Clean with damp cloth
Batteries: 2 AAA alkaline batteries included
Battery Life: Typical battery life of greater than 1 year
This unit operates by sensing the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow and beeping at the tip (if not switched OFF) indicate the presence of voltage.
Specifications
Voltage Sensing Ranges: Nominally, 90 V AC to 1000 V ACDetector Tip Style: Flat-tip
Light Source: One high intensity red LED
Agency Approvals: CEc CSA usC-Tick
Safety IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V
EMC IEC 61326-1: Portable
IP Rating: IP 40
Operating Temperature: -10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges: 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40 to 55°C)
Operating Altitude: 3000 m
Cleaning: Clean with damp cloth
Batteries: 2 AAA alkaline batteries included
Battery Life: Typical battery life of greater than 1 year
