Description
For proper closure, peen the prongs to fill the hole of the mating half as much as possible
Meets design requirements of federal specification RR-C-271D, TYPE II. Make sure the connecting link used is the same size as the components being joined. E.G., A 3/8 in. Connecting link is used with 3/8 in. Chain.
Any assembly made using connecting links should be rated at the working load limit of the weakest component. The working load limit of connecting links is based on a straight line pull. Any side or shock loading will significantly reduce the actual working load limit. Never re-use a connecting link.
Material: Carbon Steel
Finish: Self-Colored
Working Load Limit: 7250 lb
A Dimension: 2-1/8 in
B Dimension: 3-3/8 in
C Dimension: 13/16 in
D Dimension: 1-7/8 in
Weight Each (lbs.): 0.75 lb
Made in USA: Yes
Quantity: 2 mating halves (one complete link)
Meets design requirements of federal specification RR-C-271D, TYPE II. Make sure the connecting link used is the same size as the components being joined. E.G., A 3/8 in. Connecting link is used with 3/8 in. Chain.
Any assembly made using connecting links should be rated at the working load limit of the weakest component. The working load limit of connecting links is based on a straight line pull. Any side or shock loading will significantly reduce the actual working load limit. Never re-use a connecting link.
Specifications
Trade Size: Fractional 5/8 inMaterial: Carbon Steel
Finish: Self-Colored
Working Load Limit: 7250 lb
A Dimension: 2-1/8 in
B Dimension: 3-3/8 in
C Dimension: 13/16 in
D Dimension: 1-7/8 in
Weight Each (lbs.): 0.75 lb
Made in USA: Yes
Quantity: 2 mating halves (one complete link)
