Description
Restraint Lanyards are intended to be used on platforms, in buckets and other areas to prevent the possibility of a fall. Different lengths and types are available to restrict leading edge access. Restraint lanyards can be attached to the back D-ring on a full body harness or restraint belt. We know that the stakes are high. And, when it comes to worker safety, there are no second chances. That is why. Fall Protection is all we do. And we take it seriously. Advanced technical design and rigorous quality testing are the backbone of FallTech's manufacturing process. We train and staff fall protection experts that understand problems, not just fall protection products, and can identify fall safety solutions that save lives. At FallTech, we engineer innovative fall safety solutions as though lives depend on it. Because they do.
strength
Connector: Alloy Steel; Min.5,000 lbs tensile strength
Connector Gates: Alloy Steel; Min. 3,600 lbs. from load and
side load
Performance Specifications
Tensile Strength: Min. 5,000 lbs.
Max. Capacity: 425 lbs.
To maintain ANSI Z359 compliance, limit
total user weight to 310lbs
Relevant Standards
OSHA: CFR1926.502, CFR1910.66
ANSI: A10.32-2004, Z359.3-2007, Z359.12-2009
Specifications
Webbing: Webbing; polyester; Min. 9,800 lbs tensilestrength
Connector: Alloy Steel; Min.5,000 lbs tensile strength
Connector Gates: Alloy Steel; Min. 3,600 lbs. from load and
side load
Performance Specifications
Tensile Strength: Min. 5,000 lbs.
Max. Capacity: 425 lbs.
To maintain ANSI Z359 compliance, limit
total user weight to 310lbs
Relevant Standards
OSHA: CFR1926.502, CFR1910.66
ANSI: A10.32-2004, Z359.3-2007, Z359.12-2009
